Designed for very rapid imaging of low light events, combining > 500 frames/sec with single photon detection capability and > 90% Quantum Efficiency.
Thermoelectric cooling down to -100°C minimizes EM-amplified darkcurrent, whereas Andor’s ‘overclocked’ vertical shift speeds minimize both clock induced charge noise and vertical smear during frame transfer.
The iXon3 860 Back-Illuminated EMCCD benefits from an advanced set of user–requested features, including OptAcquire, Count Convert, Spurious Noise Filters & Signal Averaging. RealGain™ provides quantitative EM gain calibration. Sub-millisecond biology is readily accessible through use of sub-array selection, pixel binning and Cropped Sensor Mode pushes frame rates to new extremes. The speed and sensitivity of the iXon3 860 Back-Illuminated EMCCD camera also renders it ideal for adaptive optics.
Simply select from the 2 digitization options that best suit your needs from the selection below.
D: 10, 5, 3 & 1 MHz readout @ 14 bit E: 10, 5, 3 & 1 MHz readout @ 14 bit and 1 MHz @ 16 bit
Please indicate if you require a shutter fitted to your iXon3 860.
S: Standard built-in mechanical shutter 0: No shutter
The iXon3 860 comes with 2 options for sensor types. Please select the sensor which best suits your needs.
BV: Standard back illuminated sensor UVB: Back Illuminated sensor with UV coating
The iXon3 860 with BV sensor is supplied with an AR coated Quartz window as standard, optimized for the 400 to 900 nm. The UVB sensor is supplied with an uncoated Quartz window.
The following alternative AR coated window choices are available and must be ordered at time of build (if selected):
WIN-35MM-250/450-W: Quartz window, AR coated for 250-450 nm. 97% transmission at 260 nm WIN-35MM-600/1100-W: Quartz window, AR coated for 600-1100 nm. 98% transmission at 1000 nm no alternative window
Please indicate which software and controller card you require.
The iXon3 860 requires one of the following controller cards:
CCI-23: PCI Controller card. CCI-24: PCI Express (PCIe) Controller card.
The iXon3 860 also requires one of the following software options:
Solis for Imaging: A 32-bit application compatible with 32 and 64-bit Windows (XP, Vista and 7) offering rich functionality for data acquisition and processing. AndorBasic provides macro language control of data acquisition, processing, display and export. Andor SDK: Software development kit that allows you to control the Andor range of cameras from your own application. Available as 32 and 64-bit libraries for Windows (XP, Vista and 7) and Linux. Compatible with C/C++, C#, Delphi, VB6, VB.NET, LabVIEW and Matlab. Andor iQ: A comprehensive multi-dimensional imaging software package. Offers tight synchronization of EMCCD with a comprehensive range of microscopy hardware, along with comprehensive rendering and analysis functionality. Modular architecture for best price/performance package on the market. Third party software compatibility: Drivers are available so that the iXon range can be operated through a large variety of third party imaging packages.
For compatibility, please indicate which accessories are required.
OPTOMASK: Optomask microscopy accessory, used to mask unwanted sensor area during Cropped Sensor mode acquisition. XW-RECR: Coolant re-circulator for enhanced cooling performance ACC-XW-CHIL-160: Oasis 160 Ultra Compact Chiller Unit OA-CNAF: C-mount to Nikon F-mount adapter OA-COFM: C-mount to Olympus adapter OA-CTOT: C-mount to T-mount adapter
Please enter your contact information, after which the system details will be sent to your local sales representative who will contact you shortly with a Quotation.
Name:
Email: