Software

Andor iCam Technology

Industry-leading acquisition performance for live-cell microscopy

* Image taken with the iXon^EM+ 885, courtesy of Christophe Dehio and Matthias Truttmann, Infection Biology, Biozentrum, University of Basel, Switzerland.

What is iCam Technology?

iCam encompasses a set of unique innovations that empower Andor iXon^EM+, Luca^EM and Clara cameras to operate with complete acquisition efficiency through Andor iQ multi-dimensional microscopy suite and other 3rd party imaging software packages.

Free-run imaging sequence involving dual channel acquisition protocol using rapid toggle between 1 ms and 2 ms for each channel. Both cameras have the same 512 x 512 pixel sensor. Vertical shift speed set to 0.9 μs for iXon (variable), fixed 2.0 μs for the other camera.

	Frame rate (fps)
iXon^EM+ 897 with iCam	23
Other EMCCD	12

Imaging cameras in a heightened state of readiness…

Andor’s iCam technology is a combined firmware and software innovation, a highly efficient and performance-optimized solution which is now integrated across all new Andor imaging cameras and Andor’s iQ and SDK software platforms. iCam offers next-generation EMCCD and interline CCD performance during your tightly synchronized and complex multi-dimensional microscopy experiments.

Using state of the art bi-directional communication between camera and PC, iCam really kicks in for multi-channel acquisitions during which different exposure times are rapidly toggled between channels, whether software triggered or hardware (externally) triggered, with absolute minimal overheads.

Andor iQ multidimensional software is optimised for control of Imaging cameras for a range of bio-imaging applications. The introduction of iCam enables iQ users to gain immediate access to many of its advanced performance accelerating data acquisition across multi-dimensional applications.

iCam delivers:

Enhanced software triggering during acquisition – highly efficient upload of acquisition parameters from software to camera with minimized overheads.
Ring Mode – ultimate in exposure switching during multi-channel protocols. Software pre-load up to 16 acquisition channels onto the camera.
Enhanced external trigger mode – optimized speed performance across all of Andor’s comprehensive external trigger options.
Asynchronous frame transfer mode (AFTM) – enhanced speed and synchronization in overlapped/frame transfer acquisition mode.
Andor iQ – proven market-leading performance in iQ multi-dimensional live cell microscopy software
Bi-directional communication – between PC and camera
Further enhanced baseline stability – takes Andor’s market-leading quantitative baseline stability to a whole new level!
3rd party software compatibility – most popular imaging suites can take advantage of iCam.
Turn-key technology – implemented in all new imaging EMCCDs from Andor*.

Enhanced data exchange between camera and PC

iCam allows for faster frame rates in software by using dedicated timing patterns that shorten unnecessary overhead times. These time lags prevent other EMCCD and interline cameras on the market from achieving fast frame rate during complex experimental protocols.

Furthermore, iCam’s ‘Ring Mode’ offers the capacity to use up to 16 different timing patterns uploaded into the camera head, thus external triggers can result in virtually instantaneous switching between channels, facilitating unparalleled synchronization with other peripheral equipment such as filter wheel, laser-AOTF or z-stage.

iCam upgrade route

Some iXon+, iXon and Luca cameras will be upgradable with iCam technology. Find out more...